| 257 | 1 | 98 |
| 下载次数 | 被引频次 | 阅读次数 |
塑料制品在开发、设计和成型中常会遇到许多问题,一款良好的塑料产品需要考虑很多因素,如成品设计、模具设计、材料性质及成型条件等。本文使用Moldex3D模流分析软件,找出注塑模具注射过程中可能遇到的各种问题,以便快速改善问题并减少模具开发时间与成本。本文通过Moldex3D模流分析软件,针对两种厚度不同手机模型在压力、充填时间、翘曲等数据,进行详细分析,结果显示Moldex3D软件在优化注射工艺参数等方面具有重要的作用。
Abstract：Plastic products in the development, design and molding often encounter many problems. A good plastic product need to take many factors into consideration, such as finished product design, mold design, material properties and molding conditions. In the paper, Moldex3 D mold flow analysis software is used to find out the problems that may be encountered in the mold injection process in order to improve the problem quickly and reduce the mold development time and cost. Moldex3 D software is used to analyze the pressure, filling time and warpage of the two different mobile phone models in the paper. The results show that Moldex3 D software plays an important role in optimizing the injection process parameters.
[1]申开智.塑料成型模具(第2版)[M].北京:中国轻工业出版社,2002.SHEN Kaizhi.Plastic molding mold(2nd edition)[M].Beijing:China Light Industry Press,2002.(in Chinese)
[2]王强,黄爱华,涂序斌.手机镜片注射模设计与制造[J].锻压技术,2007,32(3):74-76.WANG Qiang,HUANG Aihua,TU Xubing.Design and Manufacture of Injection Mold for Mobile Phone Lens[J].Forging Technology,2007,32(3):74-76.(in Chinese)
[3]周华民,李德群.基于注射成型CAE模拟的熔合纹确定与评价:(I)熔合纹的确定[J].塑料工业,2002,30(2):32-33.ZHOU Huamin,LI Dequn.Location and evaluation of weld lines based on CAE simulation for injection molding:(I)location of weld lines[J].China Plastic industry,2002,30(2):32-33.(in Chinese)
[4]高月华,王希诚.注塑产品的翘曲优化及影响因素分析[J].化工学报,2007,58(6):1576-1580.GAO Yuehua,WANG Xicheng.Optimization of warping products and analysis of influencing factors[J].Journal of Chemical Industry,2007,58(6):1576-1580.(in Chinese)
[5]祝铁丽,王敏杰.注塑成形制品收缩过程的数值模拟[J].机械工程学报,2002,38(9):145-149.ZHU Tieli,WANG Minjie.Shrinkage computation of injection molded parts[J].Journal of Mechanical Engineering,2002,38(9):145-149.(in Chinese)
[6]王利霞,杨杨,王蓓.注塑成型工艺参数对制品体收缩率变化的影响及工艺参数优化[J].高分子材料科学与工程,2004,20(3):173-176.WANG Lixia,YANG Yang,WANG Bei.Effects of Injection Molding Parameters on Shrinkage of Protected Body and Optimization of Process Parameters[J].Polymer Materials Science and Engineering,2004,20(3):173-176.(in Chinese)
[7]严波,周华民,李德群.基于GLS/S UPG的三维注射成形充模过程数值模拟[J].华中科技大学学报(自然科学版),2008,6(12):83-86.YAN Bo,ZHOU Huamin,LI Dequn.Numerical simulation of 3D plastic injection molding via GLS/SUPG[J].Journal of Huazhong University of Science and Technology(Natural Science Edition),2008,36(12):83-86.(in Chinese)
基本信息:
中图分类号:TQ320.662
引用信息:
[1]张萌,陈吉祥,赵振宇,等.手机外壳的注塑模流分析研究与应用[J].深圳信息职业技术学院学报,2017,15(01):29-32.